Activating brake when stationary (Hold)
The function is activated automatically when stationary if gear position D or R is selected and
- One Pedal Drive is activated
- the car is at risk of starting to move.
or
- One Pedal Drive is deactivated
- the car is already stationary and the brake pedal fully depressed before being released.
Deactivating brake when stationary (Hold)
The function is released when the driver selects a gear and drives off by pressing the accelerator pedal.
Note
Braking when stationary is also deactivated when the driver changes to neutral position.
The parking brake is activated automatically
- if the car is switched off.
- when the driver unbuckles the seatbelt and/or opens the driver's door.
- if the function is activate and the car has been stationary for a while (approx. 5–10 minutes).
Brake when stationary Hold can also change over to the parking brake in other situations.
Symbols in the driver display
| Symbol | Specification |
|---|---|
 | The symbol is illuminated when brake when stationary Hold is activated and holds the car stationary. Note that brake when stationary (Hold) may be activated without the symbol being illuminated. |
 | The symbol is illuminated when the function uses the parking brake to keep the car stationary. |