Adjusting One pedal drive

Updated 07/08/2024

Braking by using One pedal drive can be adjusted, enabled or disabled in drive settings.

The available settings are:

On	The function is on. You can brake by releasing the accelerator.
Auto	One pedal drive is enabled, but releasing the accelerator only applies braking force when you are close to a vehicle in front of you.
Off	The function is off. Releasing the accelerator does not engage the brakes.

Tip

Automatic creeping

By turning One pedal drive off, you also enable automatic creeping. This means that your car can move slowly without you using the accelerator.

When automatic creeping is active you can temporarily pause it by pressing down hard on the brake pedal until your car is stopped. This activates the hold feature. If you want to initiate creeping again, simply tap the accelerator.

Warning

There is a limit to the braking force that can be applied by releasing the accelerator when using One pedal drive. For hard braking you need to use the brake pedal.

Press the car symbol

in the bottom bar and go to Settings.

Go to Driving → Driving dynamics → One Pedal Drive.

Select a One pedal drive setting.