Reset sequence for pinch protection
If any fault arises with the electrical functions of the power windows, a reset sequence can be tested.
The electrically-operated sun blinds* have a reset sequence that can be tested in the event of problems.
Warning
If the starter battery is disconnected, the automatic opening and closing function must be reset to work properly. A reset must take place for pinch protection to work.
If the problem persists, or if it concerns the panoramic roof or sunroof, contact a workshop.1
Reset the power window
Start with the window in closed position.
Then operate it in the manual position 3 times upwards to closed position.
The system is initiated automatically.
Reset sun blind
Start with the sun blind* retracted.
Press the control against retracting mode for approx. 15 seconds.
The system is initialised automatically.