Deactivating/resuming Cruise Control (CC)

Cruise Control (CC) can be temporarily deactivated and put in standby mode.

Deactivating and putting CC in standby mode

To temporarily deactivate and put Cruise Control in standby mode:
P5-1507-CC rattknappar-1
Function buttons and symbols (generic illustration)
Press the P5-1507-Symbol 5x3,5-CC rattknapp Centrum-V button (2).

The set speed marker (4) and symbols will change colors from WHITE to GRAY.

This indicates that CC is temporarily in standby mode and will not maintain a set speed.

Standby mode due to action by the driver

CC is temporarily deactivated and put in standby mode if:
  • the brakes are applied
  • The gear selector is moved to N
  • the vehicle is driven faster than the set speed for more than 1 minute.

In these cases, the driver will have to regulate the vehicle's speed.

A temporary increase in speed, such as when passing another vehicle, does not affect the CC set speed. The vehicle will return to the set speed when the accelerator pedal is released.

Automatic standby mode

CC switches automatically to standby mode if:
  • the wheels lose traction
  • engine speed (rpm) is too high/low
  • brake temperature is too high
  • the vehicle's speed goes below approx. 20 mph (30 km/h)

In these cases, the driver will have to regulate the vehicle's speed.

Reactivating CC from standby mode

To reactivate CC after it has temporarily been put in standby mode:
P5-1507-CC rattknappar-1
Press the P5-1507-Symbol 5x3,5-CC rattknapp Återuppta hastighet button (1).
The set speed marker (4) will change color from GRAY to WHITE. The vehicle will then return to the most recently set speed.

 Warning

There may be a significant increase in speed after the P5-1507-Symbol 5x3,5-CC rattknapp Återuppta hastighet button has been pressed.

or

Press the P5-1507-Symbol 5x3,5-CC rattknapp Centrum-V button (2).
The set speed marker (4) and symbols will change colors from GRAY to WHITE. CC will then set and maintain the vehicle's current speed.