S90 Adjusting the second row head restraints

Adjusting the center head restraint

The center head restraint should be adjusted up or down according to the passenger's height. The restraint should be carefully adjusted to support the occupant's head.

The center rear seat head restraint should only be in its lowest position when this seat is NOT occupied. When the center seat is occupied, the head restraint must be correctly adjusted to the passenger’s height so that, if possible, the whole of the back of the head is covered.

Warning

P5-16w17-S90-rear seat-Adjust headrest center — Center head restraint button

To lower the head restraint, press and hold the button (see the illustration) and push the head restraint down carefully.

Electrically folding down the rear seat’s outboard head restraints*

P5-1617-S90-2nd seat row-Automatic folding down headrest back

The outboard head restraints can be folded down in two ways from the center display.

From Function view

P5-1507-Head rest fold-symbol funktionsvyn

Go to the center display's Function view.

Tap the Headrest fold button.

Via settings

The ignition has to be in at least mode II.

In the center display's Top view, tap Settings.

Tap My Car → Seats

Select Fold Headrest On Second Row Seats to fold down the outboard head restraints.

The head restraints must be returned to the upright position manually until they click into position.

Warning

For safety reasons, no one should be allowed to sit in the outboard rear seat positions if the head restraints are folded down. If these positions are occupied, the head restraints should be in the upright (fixed) position.

The head restraint must be locked in the upright position after it has been folded up.