Linking a remote key to a driver profile

A remote key is not initially linked to a specific driver profile. When the key is used to unlock the vehicle/start the engine for the first time, the Guest profile will be used.

A driver profile can be selected manually each time the vehicle is unlocked/started without a remote key being linked to that profile. When the vehicle is started, the most recently selected driver profile will be activated. If the key has previously been linked to a driver profile, it is not necessary to manually select a profile when that particular key is used.

Linking a remote key to a driver profile for the first time

Select a profile to link to the remote key (if that profile is not already active).

Pull down the center display's Top view and tap Settings.

Tap System → Driver Profile.

Tap the profile to be linked to the remote key. The Guest profile cannot be linked to a remote key.

Open Top view in the center display and tap Settings → System → Driver Profile → Edit Profile.

Select Connect key to link the selected profile to the remote key currently being used. A profile can only be linked to the remote key that is currently being used. If there are several keys in the vehicle at the same time, More than one key is found, put the key you want to connect on backup reader will be displayed.

When Profile connected to key is displayed, the remote key and the selected driver profile have been linked.

Tap OK to confirm.

The key currently in use will remain linked to the selected driver profile as long as the Connect key box is not deselected.