Before the bulb can be accessed, the headlight housing's cover must be removed, see the article "Replacing bulbs."
Important
Never touch the glass of bulbs with your fingers. Grease and oils from your fingers vaporize in the heat and will leave a deposit on the reflector, which will damage it.
Remove the high beam round rubber cover from the headlight housing.
Remove the bulb by turning the bulb holder upward and then pulling it straight out.
Carefully pry the plastic sleeve by the connector's locking lug to release it.
Remove the connector from the bulb.
Replace the bulb.
Position the bulb in the socket and turn it downward.
Put the rubber cover back into place.