Detailed child restraint information

The table provides detailed information for manufacturers of child restraint systems regarding which locations in the car are appropriate for different kinds of child restraints.
Seat position overview for right-hand drive
4
2
3
1
5
Seat position112 (with deactivated airbag, only rear-facing child restraints)232 (with activated airbag, only front-facing child seats)23345
Seat position suitable for universal category restraints which are attached using the car's seatbelt (Yes/No)NoYes4Yes4YesNoYes
Seat position for i-Size (Yes/No)NoNoNoYesNoYes
Seat position lateral fixture (L1/L2/No)NoNoNoNoNoNo
Largest suitable rearward-facing fixture (R1/R2/R3/No)NoR35NoR3NoR3
Largest suitable forward-facing fixture (F2/F2x/F3/No)NoNoF35F3NoF3
Largest suitable booster fixture (B2/B3/No)NoNoB3B3NoB3
  1. 1In accordance with illustration.
  2. 2The seat cushion extension must always be retracted for the installation of child seats.
  3. 3A child seat with support legs can be used on this seat.
  4. 4Adjust the backrest to a more upright position.
  5. 5Works for the installation of ISOFIX child restraints that are vehicle specific approved (IL) if the car is equipped with the ISOFIX console accessory (availability may vary between regions). Top tether anchorage points are not available for this seat.