Cargo compartment cover*

The cover can be used to conceal objects in the cargo compartment.

Installing the cover

P5-1617-V90-load cover installing
P5-Icon red arrow 1

With the cover retracted, press the end piece on one side of the cargo area cover into the retaining bracket in the side panel of the cargo area.

P5-Icon red arrow 2

Do the same on the opposite side.

P5-Icon red arrow 3

Press both sides of the cover, one at a time, until they click into place.

The red mark will no longer be visible. Check that both ends of the cover are securely locked in place.
P5-1617-V90-load cover front flap
Fold out the cover's front flap to eliminate a gap between the cover and the rear seat backrest.

If the cargo net* is used at the same time as the cargo compartment cover, the net has to be put in place first.

Using the cover

The cover can be used in two positions: fully open to completely cover the cargo compartment or partially retracted to make it easier to reach farther into the cargo compartment.

Fully open

P5-1617-V90-load cover full expansion
Grasp the handle and pull out the cover above the side panels in the cargo compartment as far as possible.
With the cover completely open, press the attaching pins on the rear corners of the cover into the grooves in the side panels and release the cover slightly while pressing the handle lightly downward to hook the pins into the grooves.
The cover will remain in the fully open position.

Partially retracted (loading) position

From the fully open position:
P5-1646-V90-load cover half expansion other solution
Move the handle to release the attaching pins from the hooks.
The cover will open until it reaches the partially retracted position.

In vehicles equipped with the automatic cargo compartment cover*, if the cover is fully open, it will move automatically to the partially retracted position whenever the tailgate is opened and will return to the fully open position when the tailgate is closed.

To fully open the cover from the partially open position:

Grasp the handle and pull the cover out to the fully open position.
Release the handle so that the pins engage in the hooks.
The cover will remain in the fully open position.

In models equipped with the electrically operated cargo compartment cover*, the cover will retract from the fully open position to the loading position each time the tailgate is opened and return to the fully open position when the tailgate is closed. If the cover is obstructed while moving, it is designed to return to the loading position automatically.

 Important

  • Avoid placing any objects on the cover when it is open.
  • The electrically operated cover may not be able to move automatically at low passenger compartment temperatures.
  • If there are large objects in the cargo compartment, put the electrically operated cover in the fully retracted position so that it does not come into contact with the object(s) while moving.

 Warning

Keep fingers, hands, etc. clear of the electrically operated cargo area cover while it is moving.

Retracting the cover

From the fully open position:
Lift the cover's handle and pull it rearward slightly to release the attaching pins from their grooves. Allow the cover to retract.
From the partially retracted position:
Grasp the handle and lift it slightly to release the attaching pins from their grooves. Pull the cover to the fully open position.
Allow the cover to retract completely.

Removing the cover

With the cover retracted, press the button on one of the cover's ends and lift out that end.

Carefully lift the cover up/out.
The other end will release automatically. Lift the cover out of the cargo compartment.
  1. * Option/accessory.