The steel grid is made up of the grid itself and two separate mounting brackets.
Warning
- No one should ever be allowed to remain in the cargo compartment when the vehicle is moving.
- The steel grid may only be used in the rear position described in this article. The ceiling attachment points above the front seats are not intended to anchor the steel grid.
- After being mounted, be sure that the steel grid is securely anchored in place.
Mounting
Before installing the steel grid, the existing plastic ceiling mounting consoles must be replaced by steel ones. This should preferably be done by a trained and qualified Volvo service technician.
Fold down the rear seat backrests.
Be sure that the steel grid is turned in the right direction and that the handles are in the installation position pointing up. Lift the grid into the vehicle through one of the rear doors. This is easier to if two people can hold the grid in the correct position.
Place the grid's attachment points in the ceiling mounting consoles and fold up the grid toward the roof liner without moving the handle.
Pull the handles outward to leave the installation position and turn the handles a quarter turn rearward to lock the steel grid in place. The handles should point rearward when they are in the locked position.
Check that the grid is securely in place and fold it down toward the rear seat backrests.
Removing
Perform the steps above in reverse order.