The load cover is installed behind the rear seats. When the load cover screen is fully extended, it covers the whole of the boot storage space.
- Make sure that the load cover is facing the right way up. You should be able to grasp the handle on the screen.
- Fold out the cover's front flap. This hides the gap in the boot between the load cover and rear seats.
- If you're installing both the load cover and the safety net, install the safety net first.
Installing the load cover
There are indentations on each side of the boot space.
Push the load cover into the indentations, one end at a time, until both sides of the load cover click into place. Ensure the locks on both ends are positioned so that the red marks are covered.
Extending the load cover screen
Pull the load cover screen by the handle over the boot's side panels.
Guide the ends of the load cover into the locked position in the grooves.
Tip
Loading position
After you've extended and locked the load cover into position, it automatically retracts to uncover part of the boot area when you open the boot hatch. This can be useful when loading your car.
Important
It is not advisable to place objects on the load cover. They will not be secure and can cause damage in the event of a collision or sudden braking.