Warning for speed limitation and speed camera from road sign information*
Road sign information (RSI1) includes subfunctions that can warn the driver if a speed limit has been exceeded or in connection with speed cameras.
The function is available in certain markets.
Warning for speed limit
![Px-2037-iCup-Speed limit symbol](https://www.volvocars.com/images/support/imga31734e953672952c0a801525750f92e_1_--_--_VOICEpnghigh.png?imwidth=1280)
The speed warning is given by the driver display symbol2 showing the applicable maximum permitted speed temporarily flashing when this speed is exceeded.
A speed warning is always given if the speed limit is exceeded in connection with speed camera information.
The speed warning alerts the driver when the applicable speed limit or stored maximum speed is exceeded. This warning is repeated once after approx. 30 seconds within one and the same speed limit zone unless the driver reduces the speed.
Another warning is available only when the driver has reduced the speed by at least 5 km/h(3 mph) and then exceeds the speed limit again, or when the car reaches an area with a different speed limit.
Warning for speed camera
![VCC-2304-speed camera warning](https://www.volvocars.com/images/support/img9da62b5d1005f003c0a80152273621b7_1_--_--_VOICEpnghigh.png?imwidth=1280)
Cars equipped with Road sign information and map data3 can give information on upcoming speed cameras in the driver display, provided that the navigation map for the current area contains information on speed cameras.
If the car exceeds a detected speed limit with the Speed warning function activated, a speed warning is given when the car approaches a speed camera, provided that the navigation map for the area in question contains information on speed cameras.