Warning for speed limitation and speed camera from road sign information*

Updated 26/04/2021

Road sign information (RSI1) includes subfunctions that can warn the driver if a speed limit has been exceeded or in connection with speed cameras.

P5-XC90H-1519-Road Sign Information, speed camera information in driver display

Warning for speed limit

P5-1519-Road Sign Information, 90 km/h symbol

The speed warning is given by the driver display symbol2 showing the applicable maximum permitted speed temporarily flashing when this speed is exceeded.

A speed warning is always given if the speed limit is exceeded in connection with speed camera information.

The speed warning alerts the driver when the applicable speed limit or stored maximum speed is exceeded. This warning is repeated once after approx. 30 seconds within one and the same speed limit zone unless the driver reduces the speed.

Another warning is available only when the driver has reduced the speed by at least 5 km/h (3 mph) and then exceeds the speed limit again, or when the car reaches an area with a different speed limit.

Note

To get an acoustic warning if you exceed the required speed, the Speed Limit Warning function must be activated and the Road Sign Audio Warning subfunction must be set to On. An acoustic warning is then given if the car's speed exceeds the speed indicated by the Road Sign Information function in the driver display.

Warning for speed camera

P5-1519-Road Sign information, speed camera warning

A car equipped with Road Sign Information and map data3 can provide information on an upcoming speed camera in the driver display4.

If the car exceeds a detected speed limit with the Speed warning function activated, a speed warning is given when the car approaches a speed camera, provided that the navigation map for the area in question contains information on speed cameras.

Note

An option is available to receive an acoustic warning for speed cameras independently of the car's speed and exceeded speed limit, even if the Road Sign Audio Warning function is deactivated.