Start charging the hybrid battery
The car's hybrid battery is charged with a charging cable between the car and a 230 VAC socket1.
Important
Note
Connect the charging cable to a 230 VAC socket. Never use an extension cable.
Remove the charging handle's protective cover and then press the handle the whole way into the socket for the car.
Clamp the charging handle's cover in place as illustrated.
Important
The charging cable's charging handle is fastened/locked in, and charging starts within 5 seconds. When charging has started, the LED lamp in the charging input socket flashes with a green glow. The driver display shows the remaining estimated charging time or whether charging is not working as intended. Read more in the section "Charge status".
Battery charging can be interrupted for a while if the car is unlocked:
- and the door is opened - charging restarts within a few minutes.
- without the door being opened - the car is relocked automatically. Charging restarts after 1 minute.
Note
- depress the brake pedal
- open one of the doors
- set the car in ignition position I by turning the start knob to START and releasing.
Important
Never unplug the charging cable from the 230 VAC socket while charging is in progress - there is then a risk of damaging the 230 VAC socket.
Always stop charging first before unplugging the charging cable from the car's charging input socket and then from the 230 VAC socket.
Condensation from the air conditioning may drip under the car during charging. This is normal and takes place due to cooling of the hybrid battery.