Using the memory function in the power front seat*
The memory function stores settings for the seat, outer rearview and door mirrors, and head-up display*.
It is possible to store three different settings with the memory function. The memory function keypad is located either on one front door or both*.
Memory button
Memory button
Memory button
Button M for storing settings.
Store setting
Adjust seat, door mirrors and head-up display to the desired position.
Push the M button and release. The light indicator in the button illuminates.
Within three seconds, depress button 1, 2 or 3.
When the position has been stored in the selected memory button an acoustic signal sounds and the light indicator in the M button extinguishes.
If none of the memory buttons is depressed within three seconds then the M button extinguishes and no storing takes place.
The seat must be adjusted again before a new memory can be set.
Using a stored setting
A stored setting can be used with the front door either open or closed:
Front door open
Press one of the memory buttons 1 - 3 with a brief touch. Seat, door mirrors and head-up display move and then stop at the positions stored in the selected memory button.
Front door closed
Hold one of the memory buttons 1 - 3 depressed until seat, door mirrors and head-up display stop in the positions that are stored in the selected memory button.
If the memory button is released, the movement of the seat, door mirrors and head-up display will be stopped.
Warning
Risk of crushing! Make sure that children do not play with the keypad. Check that there are no objects in front of, behind or under the seat during adjustment. Make sure that none of the passengers in the rear seat is in danger of becoming trapped.