Headlamp levelling

Headlamp levelling1 is adjusted using one of the thumbwheels in the instrument panel.
Leave the engine running, or have the car's electrical system in ignition position I.
Roll the thumbwheel up/down to raise/lower beam alignment.

The position in which the thumbwheel should be set for a number of load cases is shown below.

P5-1507 Headlamp levelling, positions
Examples of thumbwheel position.
  1. P5-Icon gray box AThumbwheel in position 0
  2. P5-Icon gray box BThumbwheel in position 1
Load caseThumbwheel position
Only driver.0
Driver and passenger in the front passenger seat.0

Driver and passenger in the front passenger seat.

Three passengers in the second seat row.

1

Driver and passenger in the front passenger seat.

Three passengers in the second seat row.

220 kg load in the cargo area.

1
Driver and maximum load in the cargo area.2

Driver and passenger in the front passenger seat.

Three passengers in the second seat row.

Two passengers in the third seat row.

1

Driver and passenger in the front passenger seat.

Two passengers in the third seat row.

0

Driver and passenger in the front passenger seat.

Three passengers in the second seat row.

Two passengers in the third seat row.

70 kg load in the cargo area.

1
  1. 1 Applies to vehicles with halogen headlamps.