Activating and deactivating private locking

Enter the security code before using for the first time

A security code needs to be selected during the first time the function is used. It can then be used to deactivate private locking if the selected PIN code has been lost or forgotten. The security code acts as a PUK code for all subsequent PIN codes set for the private locking function.

Save the security code in a safe place.

To create a security code:

Press the button for private locking in the function view.

A pop-up window is shown.

Enter the desired security code.

The security code is saved. The private locking function is now ready for activation.

If the system has been reset then the above procedure needs to be repeated.

Activate private locking

Press the button for private locking in the function view.

A pop-up window is shown.

Enter the code to be used in order to unlock the glovebox and tailgate after locking and tap on Confirm.

The glovebox and the tailgate are locked. Confirmation of locking takes place by means of a green indicator being shown by the button in the function view.

Deactivate private locking

Press the button for private locking in the function view.

A pop-up window is shown.

Enter the code that was used for locking and tap on Confirm.

The glovebox and the tailgate are unlocked. Confirmation of unlocking takes place by means of the green indicator by the button in the function view extinguishing.