The driver display is located in front of the driver, behind the steering wheel.
The driver display activates as soon as you open a door and turns off if it isn't used for a short period of time. To turn it back on, either open a door or turn the start knob clockwise and quickly let it go.
Use the steering wheel buttons to interact with the display and control what's shown on the screen.
Examples of information that can be shown in the driver display are:
- Warning and indicator symbols
- Speed
- Navigation
- Notification messages
- Fuel meter
- Trip meter
Display modes
There are two driver display modes that you can choose from: calm and map. Use the driver display mode button 
on the steering wheel to change the display mode.
on the steering wheel to change the display mode.| Calm | This displays essential information, such as speed, fuel level and range, as well as warning and indicator symbols. |
| Map | The driver display shows your current navigation route on a map as well as essential driving and car information. |
Warning
If the driver display turns off, doesn't turn on or is only partially legible, you must not use the car. This is because the driver will not receive warnings and car status information shown in the driver display, such as warnings and information relating to brakes, airbags or other safety systems. If there is an issue with the driver display, contact an authorised Volvo workshop.
Tip
You can change driver display settings in the centre display.
