Action in the event of warning for low tyre pressure
When the system for tyre pressure1 warns that tyre pressure is too low, action is required.
Check and rectify the tyre pressure when the indicator symbol for the system is illuminated and the Tyre pressure low message is shown.
Switch off the car.
Check the tyre pressure in all four tyres with a tyre pressure gauge.
Inflate the tyres to the correct pressure, see the decal on the door pillar on the driver's side showing the recommended pressure for factory fitted tyres.
Perform calibration of the system via the centre display after tyre pressure adjustment.
Note that the indicator symbol does not extinguish until the low tyre pressure has been rectified and new calibration has been performed.
Note
To avoid incorrect tyre pressure, the pressure should be checked on cold tyres. "Cold tyres" means the tyres are the same temperature as the ambient temperature (approx. 3 hours after the car has been driven). After a few kilometres of driving, the tyres warm up and the pressure increases.
Note
- After a tyre has been inflated, always refit the dust cap in order to avoid damage to the valve from gravel, dirt, etc.
- Only use plastic dust caps. Metal dust caps can rust and become difficult to unscrew.
Warning
- Incorrect tyre pressure may lead to tyre failure, which could result in the driver losing control of the car.
- The system cannot indicate sudden tyre damage in advance.