Folding the grid up/down
Grasp the lowering edge of the grid and pull it rearward/upward, or push it downward/forward.
Note
If the steel grid is to be used with the optional cargo area cover, the grid must be folded down before the cargo area cover is put in place.
Installing the steel cargo grid
In order to install the steel grid, the rear seat backrests must be completely folded down, see Rear seats – folding backrestfor instructions.
Note
- The steel cargo grid is easiest to install by two people, and should be folded down.
- When installing the grid, the handle should be on the front side of the grid (see illustrations
– 
).
Put the handle in the installation position, see the illustration. Press lightly on the handle in order to turn it to this position, see the arrow.
Press in the piston toward the grid and press it into the attachment bracket near the ceiling.
Turn the handle 90° 
. Press lightly as shown in illustration if necessary. Attach the grid 
by moving the handle 90°.
Do the same on the opposite side of the vehicle.
