Deactivating/reactivating the Speed Limiter*

The Speed Limiter (SL) can be temporarily deactivated and put in standby mode.

Deactivating and putting SL in standby mode

To temporarily put the Speed Limiter in standby mode:
P5-1546-USA-speed limiter illustration with US speeds
Function buttons and symbols
Press the P5-1507-Symbol 5x3,5-CC rattknapp Centrum-V button (2).

The symbols in the instrument panel will change colors from WHITE to GRAY.

This indicates that SL is temporarily in standby mode and will not limit the vehicle's maximum speed.

Reactivating SL from standby mode

To reactivate SL after it has temporarily been put in standby mode:
Press the P5-1507-Symbol 5x3,5-CC rattknapp Återuppta hastighet button (1).
The maximum speed marker (4) and symbols will change colors to WHITE and the vehicle's maximum speed will be limited to the previously set maximum speed.

or

Press the P5-1507-Symbol 5x3,5-CC rattknapp Centrum-V button (2).
The symbols will change colors from GRAY to WHITE and the vehicle's current speed will be set as the maximum speed.

Increasing the speed with the accelerator pedal

The set maximum speed can be temporarily exceeded using the accelerator pedal without putting SL in standby mode, for instance when quick acceleration is required.

Press the accelerator pedal as far down as possible and release it when the vehicle has reached the desired speed.
SL remains activated (the symbols in the instrument panel will remain WHITE).
Release the accelerator pedal when the temporary acceleration is completed.
The vehicle will slow down and its speed will remain under the set maximum speed.
  1. * Option/accessory.